Hydraulic Press for Sheet Metal

HYDRAULIC DEEP DRAW PRESS WITH BLANK HOLDER FOR DRAW (TOP+BOTTOM CYL.)

Model No. Cap. Ton Main Cyl. Cap. (Ton) (Down Stroke) Blank Holder Cap. (Ton) (Up Stroke) Bolster Size (mm) Day-Light Gap Blank Holder Stroke Motor H.P. Ejector Cyl. Cap. (Tons)
FTBP 100 100 50 50 400 X 400 500 150 7.5 1 NO.
FTBP 150 150 75 75 500 X 500 600 250 10 1 NO.
FTBP 200 200 100 100 650 X 650 400 200 15 1 NO.
FTBP 300 300 150 150 800 X 800 700 300 30 1 NO.
FTBP 400 400 200 200 800 X 800 700 300 30 1 NO.
FTBP 500 500 250 250

NOTE:

  • THE PRESS IS AVAILABLE UP TO 500 TON CAPACITY AS PER THE CUSTOMER REQUIREMENT
  • THE PRESS CAN BE DESIGNED PILLAR / GATE / FRAME TYPE.
  • HIGH CAPACITY PRESS WILL BE DESIGNED COLUMN TYPE PREFERABLY.
  • THE PRESS CAN BE PROVIDED WITH SPEED AS PER YOUR REQUIREMENT.
  • THE MOTOR H.P CAN BE CHANGED AS PER THE SPEED PROVIDED.

HYDRAULIC DEEP DRAW PRESS WITH BLANK HOLDER

Model No. Cap. Ton Main Cyl. Cap. (Ton) Blank Holder Cap. (Ton) Bolster Size (mm) Day-Light Gap Blank Holder Stroke Main Cyl. Stroke Motor H.P. Ejector Cyl. Cap. (Tons)
FDAP 150 150 75 75 700 X 700 600 300 550 7.5 10
FDAP 250 250 150 150 900 X 900 600 300 550 10 15
FDAP 400 400 200 200 1200 X 1200 750 400 700 20 20
FDAP 500 500 250 250 1200 X 1500 800 450 750 20 20
FDAP 500 500 250 250 1200 X 1800 800 450 750 25 20
FDAP 600 600 300 300 1200 X 1800 900 450 850 40 25
FDAP 800 800 400 400 1200 X 1800 900 500 900 50 25
FDAP 800 800 400 400 1800 X 1800 1000 500 900 50 25
FDAP 1000 1000 500 500 2000 X 2000 1200 600 1100 75 25

NOTE:

  • THE PRESS IS AVAILABLE UP TO 2500 TON CAPACITY AS PER THE CUSTOMER REQUIREMENT
  • THE PRESS CAN BE DESIGNED PILLAR / GATE / FRAME TYPE.
  • HIGH CAPACITY PRESS WILL BE DESIGNED COLUMN TYPE PREFERABLY.
  • THE PRESS CAN BE PROVIDED WITH SPEED AS PER YOUR REQUIREMENT.
  • THE MOTOR H.P CAN BE CHANGED AS PER THE SPEED PROVIDED.
  • SPECIALLY DESIGNED FOR S.S. KITCHEN SINK MANUFACTURING.

HYDRAULIC PRESS WITH DIE CUSHION

Model No. Cap. Ton Platen Size (mm) Day Light Gap (mm) Main Cyl. Stroke (mm) Die Cushion Cap. (Ton) Die Cushion Cyl. Stroke (mm) Die Cushion Table (mm) Motor H.P
FDCP 150 150 600 X 600 600 400 60 250 300 X 300 20
FDCP 250 250 900 X 750 750 450 100 300 450 X 300 40
FDCP 400 400 1350 X 1000 800 500 160 300 800 X 500 50
FDCP 500 500 1500 X 1000 800 500 200 350 900 X 600 60
FDCP 600 600 1600 X 1200 900 600 240 400 900 X 600 60
FDCP 800 800 1800 X 1500 1000 600 320 400 1000 X 800 75
FDCP 1000 1000 2100 X 1800 1200 750 400 300 1200 X 1000 100
FDCP 1000 1000 3000 X 2000 1200 900 400 450 2500 X 1500 100
FDCP 1200 1200 2500 X 2000 1200 750 480 350 1500 X 1200 150
FDCP 1200 1200 4000 X 2500 1200 900 480 500 3500 X 2000 150

NOTE:

  • THE PRESS IS AVAILABLE UP TO 8000 TON CAPACITY AS PER THE CUSTOMER REQUIREMENT.
  • THE PRESS WILL BE AVAILABLE WITH PILLAR /GATE /FRAME TYPE.
  • HIGH CAPACITY PRESS WILL BE PREFERRED IN PRESTRESSED TIE ROD COLUMN TYPE.
  • THE PRESS WILL BE MANUFACTURED AS PER THE CUSTOMER REQUIREMENT.
  • THE PRESS CAN BE PROVIDED WITH SPEED AS PER YOUR REQUIREMENT.
  • THE MOTOR H.P CAN BE CHANGED AS PER THE SPEED REQUIRED.

HYDRAULIC PRESS FOR CUTLERY (COINING)

Model No. Cap. Ton Bed Size Daylight Gap Stroke Motor H.P. (kW) Working Pressure
FCP 200 200 500 X 500 300 150 10 250 BAR
FCP 300 300 600 X 600 300 150 15 250 BAR
FCP 500 500 750 X 750 400 150 25 250 BAR
FCP 700 700 850 X 850 400 150 30 250 BAR
FCP 1000 1000 1000 X 1000 450 200 50 250 BAR

NOTE:

  • THE PRESS IS AVAILABLE UP TO 2000 TON CAPACITY AS PER THE CUSTOMER REQUIREMENT
  • THE PRESS CAN BE DESIGNED PILLAR / GATE / FRAME TYPE.
  • HIGH CAPACITY PRESS WILL BE DESIGNED COLUMN TYPE PREFERABLY.
  • THE PRESS CAN BE PROVIDED WITH SPEED AS PER YOUR REQUIREMENT.
  • THE MOTOR H.P CAN BE CHANGED AS PER THE SPEED PROVIDED.

HYDRAULIC DEEP DRAW PRESS (TOGGLE TYPE)

Model No. Cap. Ton Main Cyl. Cap. (Ton) (Down Stroke) Blank Holder Cap. (Ton) (Up Stroke) Toggle Cylinder Bolster Size (mm) Day-Light Gap Blank Holder Stroke Motor H.P. Ejector Cyl. Cap. (Tons)
FDTP 50
FTBP 75
FTBP 100
FTBP 150 150 75 75 400 X 400 300 200 10 1 NO.
FTBP 200

NOTE:

  • THE PRESS IS AVAILABLE UP TO 500 TON CAPACITY AS PER THE CUSTOMER REQUIREMENT
  • THE PRESS CAN BE DESIGNED PILLAR / GATE / FRAME TYPE.
  • HIGH CAPACITY PRESS WILL BE DESIGNED COLUMN TYPE PREFERABLY.
  • THE PRESS CAN BE PROVIDED WITH SPEED AS PER YOUR REQUIREMENT.
  • THE MOTOR H.P CAN BE CHANGED AS PER THE SPEED PROVIDED.

HYDRAULIC TRIPLE ACTION PRESS

 

WE OFFER A RANGE OF TRIPLE ACTION HYDRAULIC PRESSES THAT ARE CAPABLE TO BRING REVOLUTION IN DEEP DRAW PROCESSES. OUR RANGE OF TRIPLE ACTION HYDRAULIC PRESS IS A HIGH PRODUCTION PRESS WITH HIGH SPEED, 4 PILLAR TYPE, AND IS USED FOR LONG DRAW OPERATION OF SHEET METAL COMPONENT. THESE TRIPLE ACTION HYDRAULIC PRESSES ARE FULLY EQUIPPED WITH PLC OR LVDT DEPTH CONTROL, AUTOMATIC PHOTO SENSOR AND ELECTRONIC SAFETY GUARD.

OUR TRIPLE ACTION HYDRAULIC PRESSES ARE USED FOR LONG DRAW COMPONENTS WHICH REQUIRE TWO TIMES DRAWING, BUT IN THIS MACHINE LONG DRAW CAN BE DONE AT A TIME. WE MANUFACTURE TWO TYPES OF TRIPLE ACTION HYDRAULIC PRESS SUCH AS:

  • 4 PILLAR TYPE TRIPLE ACTION HYDRAULIC PRESS 
  • FRAME TYPE TRIPLE ACTION PRESS 


THE HYDRAULIC TRIPLE ACTION PRESSES ARE MANUFACTURED WITH EXCELLENCE AND IS DESIGNED WITH HEAVY DUTY CONSTRUCTION, DURABLE HYDRAULIC COMPONENTS AND SOPHISTICATED CONTROL SYSTEMS. THESE TRIPLE ACTION PRESS IS DESIGNED IN A MANNER TO PROVIDE ACCURACY IN THE FINISHED PRODUCT AND ALSO CUT DOWN THE PRODUCTION COST. OUR TRIPLE ACTION PRESS IS COMPLETE WITH USER FRIENDLY CONTROL SYSTEM AND HAS THE FULL FUNCTIONALITY THROUGH PLC AND TOUCH SCREEN. THE PRESSURE, STROKE, SPEED AND DWELL CAN BE SET THROUGH PLC. THESE PRESSES WILL BE USED FOR DEEP DRAWING (LONG DRAW) COMPONENTS, AEROSPACE AND AERONAUTICAL COMPONENTS, FILTER INDUSTRIES, AND AUTOMOBILE INDUSTRIES.

 

HYDRAULIC INDUCTION PRESS

Model No. Cap. Ton Max. Stroke (mm) Max. Open Height (mm) Bed Area (Lr × Fb) (mm) Bed Up Speed (mm/sec) Motor Output (kW) Overall Size (Lr) (mm) Overall Size (Fb) (mm) Overall Size (H) (mm) Working Pressure (bar)
FSA-1000 1000
FSA-1500 1500
FSA-2000 2000
FSA-2500 2500

NOTE:

  • THE PRESS IS AVAILABLE UP TO 4000 TON CAPACITY AS PER THE CUSTOMER REQUIREMENT
  • THE PRESS CAN BE DESIGNED GATE / FRAME TYPE. HIGH CAPACITY PRESS WILL BE DESIGNED COLUMN TYPE PREFERABLY.
  • THE PRESS CAN BE PROVIDED WITH SPEED AS PER YOUR REQUIREMENT.
  • THE MOTOR H.P CAN BE CHANGED AS PER THE SPEED PROVIDED.

HYDRAULIC TRIMMING PRESS

Model No. Cap. Ton Platen Size (mm) Day Light Gap (mm) Stroke (mm) Bore / Ram Dia (mm) Motor H.P. Max. Work Pressure (kg/cm²)
FTP 100 100 500 X 500 500 400 250 15 210
FTP 200 200 750 X 600 600 450 350 15 210
FTP 300 300 900 X 600 600 450 460 20 210
FTP 400 400 1000 X 750 700 500 510 25 210
FTP 500 500 1000 X 800 750 500 560 30 210
FTP 600 600 1200 X 1000 750 500 610 40 210
FTP 800 800 1500 X 1200 900 600 710 50 210
FTP 1000 1000 1800 X 1500 1000 600 810 60 210

NOTE:

  • THE PRESS CAN BE MANUFACTURED UP TO 5000 TON CAPACITY AS PER CUSTOMER REQUIREMENT.
  • THE PRESS CAN BE USED FOR SIMPLE PRESSING / COINING / STAMPING / BENDING / FORMING / BLANKING ETC. AND ALSO FOR DIE CUSHION.
  • IN CASE OF DIE CUSHION, DIE CUSHION CYLINDER WITH OTHER SYSTEM WILL BE PROVIDED.
  • ACCORDING TO THE SPEED OF THE PRESS, MOTOR H.P CAN BE CHANGED.

THE PRESS CAN BE SUPPLIED WITH

  • DIE CUSHION / EJECTION.
  • WITH PRESSURE TRANSMITTER FOR PRECISE PRESSURE SENSING.
  • WITH LOAD CELL & L.V.D.T FOR PRECISE LOAD & STROKE CONTROL SENSING.

SINGLE ACTION HYDRAULIC PRESS

Model No. Cap. Ton Platen Size (mm) Day Light Gap (mm) Stroke (mm) Bore / Ram Dia (mm) Motor H.P. Max. Work Pressure (kg/cm²)
FSAP 100 100 500 X 500 500 400 250 15 210
FSAP 200 200 750 X 600 600 450 350 15 210
FSAP 300 300 900 X 600 600 450 460 20 210
FSAP 400 400 1000 X 750 700 500 510 25 210
FSAP 500 500 1000 X 800 750 500 560 30 210
FSAP 600 600 1200 X 1000 750 500 610 40 210
FSAP 800 800 1500 X 1200 900 600 710 50 210
FSAP 1000 1000 1800 X 1500 1000 600 810 60 210

NOTE:

  • THE PRESS CAN BE MANUFACTURED UP TO 5000 TON CAPACITY AS PER CUSTOMER REQUIREMENT.
  • THE PRESS CAN BE USED FOR SIMPLE PRESSING / COINING / STAMPING / BENDING / FORMING / BLANKING ETC. AND ALSO FOR DIE CUSHION.
  • IN CASE OF DIE CUSHION, DIE CUSHION CYLINDER WITH OTHER SYSTEM WILL BE PROVIDED.
  • ACCORDING TO THE SPEED OF THE PRESS, MOTOR H.P CAN BE CHANGED.

THE PRESS CAN BE SUPPLIED WITH

  • DIE CUSHION / EJECTION.
  • WITH PRESSURE TRANSMITTER FOR PRECISE PRESSURE SENSING.
  • WITH LOAD CELL & L.V.D.T FOR PRECISE LOAD & STROKE CONTROL SENSING.

DOUBLE ACTION HYDRAULIC PRESS (BLANK HOLDER)

Model No. Cap. Ton Main Cyl. Cap. (Ton) Blank Holder Cap. (Ton) Bolster Size (mm) Day-Light Gap Blank Holder Stroke Main Cyl. Stroke Motor H.P. Ejector Cyl. Cap. (Tons)
FDAP 150 150 75 75 700 X 700 600 300 550 7.5 10
FDAP 250 250 150 150 900 X 900 600 300 550 10 15
FDAP 400 400 200 200 1200 X 1200 750 400 700 20 20
FDAP 500 500 250 250 1200 X 1500 800 450 750 20 20
FDAP 500 500 250 250 1200 X 1800 800 450 750 25 20
*FDAP 600 600 300 300 1200 X 1800 900 450 850 40 25
*FDAP 800 800 400 400 1200 X 1800 900 500 900 50 25
*FDAP 800 800 400 400 1800 X 1800 1000 500 900 50 25
FDAP 1000 1000 500 500 2000 X 2000 1200 600 1100 75 25

NOTE:

  • THE PRESS IS AVAILABLE UP TO 2500 TON CAPACITY AS PER THE CUSTOMER REQUIREMENT.
  • THE PRESS CAN BE DESIGNED PILLAR / GATE / FRAME TYPE.
  • HIGH CAPACITY PRESS WILL BE DESIGNED COLUMN TYPE PREFERABLY.
  • THE PRESS CAN BE PROVIDED WITH SPEED AS PER YOUR REQUIREMENT.
  • THE MOTOR H.P CAN BE CHANGED AS PER THE SPEED PROVIDED.
  • SPECIALLY DESIGNED FOR S.S. KITCHEN SINK MANUFACTURING.

C-FRAME HYDRAULIC PRESS

Model No. Cap. Ton Platen Size (mm) Day Light Gap (mm) Stroke (mm) Bore / Ram Dia (mm) Pressure (kg/cm²) Motor H.P.
FCFP 10 10 200 X 200 250 200 90 160 2
FCFP 25 25 250 X 250 300 250 140 170 3
FCFP 50 50 400 X 400 400 300 180 210 5
FCFP 75 75 450 X 400 400 300 220 210 7.5
FCFP 100 100 500 X 400 500 400 250 210 10
FCFP 150 150 600 X 450 600 450 300 215 15
FCFP 200 200 800 X 500 750 500 350 210 15
FCFP 300 300 1200 X 800 800 500 450 210 20

NOTE:

  • THE PRESS CAN BE USED FOR SIMPLE PRESSING / COINING / STAMPING / BENDING ETC.
  • AND ALSO FOR DIE CUSHION, INDUCTION TABLE & RUBBER MOULDING.
  • IN CASE OF DIE CUSHION, DIE CUSHION CYLINDER WITH OTHER SYSTEM WILL BE PROVIDED.
  • IN CASE OF RUBBER MOULDING, HEATING PROVISION IN WORKING PLATEN CAN BE PROVIDED.
  • ACCORDING TO THE SPEED OF THE PRESS, MOTOR H.P CAN BE CHANGED.

Our Featured Products

Important Links

Contact Information

Address

  • Flowmech Engineers Pvt. Ltd. Plot No. 641, Mundka, Main Rohtak Road, Near Metro Pillar No. 504, New Delhi - 110041

© Flowmech Engineers Private Limited. All Rights Reserved (Terms of Use)

Designed & Developed by The Perfectionist